Multi-Dimensional Performance Touch Controller Responds to the vertical position of the finger and the applied pressure, Can be configured in different modes, The selected mode determines which type of signal (CV,...
Expansion module For the Intellijel designed Quadra (Article Nr 440073 - not included, must be ordered separately), EOC (end of cycle) pulse outputs, Voltage control of attack and decay (with attenuators) of all four...
Interface Module Interface for balanced line-level (+4 dBu), 1x Eurorack signal path to balanced TRS 6.3 mm jack output path, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
8-Way pitch and gate sequencer Pitch, pulse count, gate mode, and skip/slide are available per step, Skip / Slide: a single-click activates the TB303-like slide (constant time portamento) with adjustable time- a double...
Analog Compressor Module Completely analog signal path, Sidchain with SVF filter - LP, BP and HP, Edcor transformers in the output stage provide a very good saturation behavior, Three different analog circuits: TUBE...
Wavefolder / Wave Shaper Fold's slider with CV input and attenuator controls the amount of wave convolution, Switch to select 2, 4 or 6 levels of folding, Also suitable for control voltages, Symmetry shifts the signal...
Spring Reverb Module Parametric EQ with frequency, Q-factor and gain controls, Limiter in feedback path prevents overriding of high level feedback, Switch to choose between three different connected tanks (one on the...
Headphone and stereo output module L and R +4 dBv unbalanced line level outputs on TS 1/4″ Neutrik jacks, Switch mono / stereo monitoring, Left input normalled to right input, Individual level attenuators and...
Interface for balanced line-level +4 dBu 2x Balanced TRS 1/4" input and output paths, 4x 6-Stage LED VU meter for simultaneous monitoring of all inputs and outputs, Input path has a gain of up to 20 dB, Output path...'
Multimode VCF and Phaser MULTI output with 27 selectable filter types, LP, BP and HP outputs, Width: 10 TE / HP, Depth: 40 mm, Power requirement: +60 mA (+12 V) / -56 mA (-12 V)
Filter for Modular Systems 2-Pole low pass, 2-pole high pass and 1-pole band pass, FM1 input works as 1V / oct when the knob is completely turned to the right (clean tracking over at least four octaves), Width: 6 TE /...
Quadruple Function and Envelope Generator Three different modes: AD (attack - decay), AHR (attack - hold - release), Cycle (produces an LFO whose frequency and curve depends on Attack and Decay), Width: 12 HP, Depth:...
6 Channel CV / Audio Mixer 6 Audio / CV inputs, 6 Mute / function inputs, 3 Bus outputs with routing switch per channel, Per channel linear LED sliders, Width: 18 HP, Depth: suitable for Skiff housing, Power...
Triple Active Attenuator Module 3 Modes per channel: active attenuator, bipolar attenuator, inverting attenuator, Width: 6 HP / HP, Depth: suitable for Skiff housing, Power requirement: +16 mA (+12 V) / -14 mA (-12 V)
Inverter Module Quad CV inverter, Inverts incoming signals by 180 degrees, Outputs are normalized to the input below, Width: 2 TE / HP, Depth: 29 mm, Power requirement: +4 mA (+12 V) / -17 mA (-12 V)
Passive Logic Module Various logic sources (triggers, gates, etc.) can be merged to form a logical OR combination output, Width: 2 TE / HP, Depth: 18 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
Logic Module Input Z is normalized to Y and Y is again to X, Bipolar voltage control of the logic types for section a and b with attenuators, Available logic types: AND (and), OR (or), NOR (not-or), XOR (exclusive or),...
Balanced TRS connectors for the Audio I/O 1U Width: 16 HP, Depth: 38 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V) Note: Requires the Audio I/O 1U (Article Nr 440098 ) - not included, must be ordered separately...
Interface Module Interface for balanced line level (+4 dBu), 1x Balanced TRS 6.3 mm jack input path to Eurorack modular signal level, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
USB/DIN MIDI interface DIN or USB MIDI input, 2x Clock outputs, one with selectable divisions, Sequencer synchronisation via run and reset outputs, Precision 0-10 V note pitch output with pitch bend & portamento CC...
USB Power Module Allows the supply of USB devices with 1A, Compatible with the TPS30 MAX and TPS80 backplanes, the TPS30MINI board requires an adapter, Width: 4 TE / HP
Interface Module 6.3 mm TS jack interface expander, Extension for the Intellijel Designs I/O 1U pedal (Article Nr 440173 - not included, must be ordered as a separate item), Width: 8 HP, Depth: 44 mm, Power...
Housing for Eurorack modules 20 Slots, Power supply: +12 V / 1500 mA, -12 V / 1500 mA, +5 V / 1000 mA, External dimensions (W x H x D): 177.4 x 81.3 x 435.6 mm, Width inside: 2x 104 TE / HP, Height inside: 1x 3 HE, 1x...
Stealth case for housing modules Colour: Stealth Black, Connectors are located on the rear of the case, 2x 6.3 mm Jack input, 2x 6.3 mm Jack output, MIDI input, output and thru connections, USB port, 28 Slots for...
Eurorack Module Joystick CV controller, Unipolar and bipolar X / Y outputs, 4 Quadrant outputs A-D (0 V - 10 V), 4 Inputs for audio and control signals for use as a vector mixer, quadraphonic pan controller or...
Intellijel Zeroscope 1U- Eurorack Module- 2-channel Eurorack oscilloscope, frequency meter and tuner- Single, Dual and X-Y Modes- adjustable timebase: 10 us - 10 s- voltage range: 0,5 V - 10 V, Hold mode- designed in...
Intellijel Designs Atlantis – двойной аналоговый полноценный субтрактивный синт войс, вдохновленный архитектурой и звуком классического Roland SH-101, выполненный в виде единого модуля в 40HP.
Monophonic MIDI to CV interface DIN or USB MIDI input, 2x Clock outputs, one with selectable divisions, Gate and trigger outputs as well as a modulation wheel and CC output for additional modulation, Width: 6 HP,...